Ir directamente a la información del producto
1 de 4


Gate Screw to be Bundled/Installed

Gate Screw to be Bundled/Installed

Precio habitual $1.00 USD
Precio habitual Precio de oferta $1.00 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.

NOTE: You need one screw per gate that you purchase.  For example, if you purchase a set of 3 notchy gates, you need three screws if you want each one to have a special screw.  If you don't purchase the same amount of screws as gates, the screws will not come installed.  You can use OEM screws if you don't have enough special screws.

This also applies to the heat set nuts + phillips locking screw.  If you want that and have purchased multiple gates, you need to purchase one per gate.  If you purchase less than the amount of heat set nuts than you have purchased gates, I will choose a random gate apply it to.

I strongly encourage screw #1 for your gates.  If option #1 happens to go out of stock, I recommend option #2.

NOTE: Every screw possibility here has different thread pitches.  If you opt for one of these special screws, always use the same kind of screw with your particular gate.  Don't use other screws once the screw you have chosen has been installed into your gate.  It will cause the threads to become weak in the gate if you do so.

There are four possibilities here:
1. (McMaster) T6 Washer Head Plastic Thread Cutting Screw made of 18-8 Stainless (recommended for best fit, functionality, and durability, lower cost), good quality
2. (Chinese) T6 Washer Head Plastic Thread Cutting Screw made of 18-8 Stainless
(recommended for a cheap runner-up option to option #1, the threads of this screw are similar to the threads of option #3 and are finer than option #1).
3. (McMaster) T6 Pan Head Plastic Thread Cutting Screw made of 18-8 Stainless (looks nicest, looks very durable as well, lower cost)
4.  Bring your own OEM screw (no screw will be sent) (cheapest, least durable, good option if you don't have special driver bits like T6).
5.  Tao installs brass heat set nut + locking phillips screw (expensive, brass insert might pull out if over-tightened, time consuming for Tao)

Compradores de la UE y el Reino Unido, ¡léanlo!

Si vive en el Reino Unido o la UE y realiza un pedido con TaoStyx64 (a través de este sitio web), espere pagar entre el 19 y el 25 % de IVA y posiblemente una tarifa de gestión de alrededor de 6 euros por finalización/cargo de gestión que se cobra al recibir el paquete o después.

Ver todos los detalles